Classic Sweater Knitting Machine

Features

Specifications

Parameter	Specification
Gauge	5G, 7G, 12G, 14G, 16G, 18G, 57G variable gauge
Knitting width	52 inches
Knitting systems	Single carriage, two or three systems.
Control system	Raynen
Maximum speed	Up to 1.4 m/s; 32 programmable speed stages. Actual knitting speed depends on gauge and knitting conditions.
Stitch density control	32-stage electronic control with stepper-motor adjustment; range 0–650; selected gauges 0–750.
Racking	Motor-driven racking, up to 2 inches; 1/2- and 1/4-needle racking at any position.
Stitch transfer	Simultaneous front/back transfer independent of carriage direction; half-stitch knitting by yarn-carrier adjustment.
Sinkers	Motor-driven sinker system, adjustable from 0–360; cross and non-cross options.
Needle selection	Fine gauge: 6-/8-stage electronic selection; coarse gauge: 4-/5-/6-stage electronic selection.
Comb device	Movable-release comb with wire closing for yarn engagement and release.
Take-down	Main roller and comb; 32-stage automatic control with sectional adjustment.
Yarn feeding	Roller feeding and yarn storage devices available to suit requirements.
Yarn monitoring	Stops at yarn knots; adjustable detection range.
Scissors and clamps	Optional scissors, clamps and yarn hook on the left of the needle bed.
Color changing	8–16 yarn carriers arranged on both sides of four double-sided guide rails.
Automatic stop	Yarn breakage, yarn knots, fabric winding, vibration, floating yarn, completed piece count, overload, specified course and program errors.
Drive	Belt drive with AC servo motor control.
Safety	Emergency stop, power cutoff, alarm indicator and full machine covers for noise and dust reduction.
Data input	USB drive or computer connection.
Lubrication	Oil outlets at the front and rear of the carriage; lubrication method and timing set through parameters.
Display	10.1-inch LCD with machine operation and multilingual display.
Power-failure recovery	Resume knitting after power is restored.

Configuration by Gauge

● Standard · ○ Optional · − Not available. Blank source cells remain blank. Final configuration is confirmed in the quotation.

Configuration	5/7G	5G	7G	12G	14G	16G	18G
5.4-inch carriage	●	●	●	●	●	●	●
Motor-driven transfer	●	●	●	●	●	●	●
Motor-driven needle pushing	●	●	●	●	●	●	●
Maximum speed (m/s)	1.4	1.4	1.4	1.4	1.4	1.4	1.4
Stitch density range	0～750	0～650	0～650	0～650	0～650	0～650	0～650
Needle selection	4-stage selection	4-stage selection	4-stage selection	6-stage selection	6-stage selection	8-stage selection	8-stage selection
Main roller	High-position roller	High-position roller	High-position roller	High-position roller	High-position roller	High-position roller	High-position roller
Racking range	±2 inches	±2 inches	±2 inches	±2 inches	±2 inches	±2 inches	±2 inches
Sinkers	●	●	●	●	●	●	●
Compound-needle comb	○	○	○	○	○	○	○
Waste-yarn-free comb	○	○	○	○	○	○	○
Yarn feeder	●	●	●	○	○	○	○
Yarn storage feeder	○	○	○	●	●	●	●
16 yarn carriers	●	●	●	●	●	●	●
Single-hole carriers (8/16 configuration)	14	14	12	10	10	10	10
Double-hole carriers (8/16 configuration)	2	2	4	6	6	6	6
Three-hole carriers	○	○	○	○	○	○	○
Emergency stop	●	●	●	●	●	●	●
Front and rear safety doors	●	●	●	●	●	●	●
Safety light curtain	●	●	●	●	●	●	●
Fabric winding alarm (infrared)	●	●	●	●	●	●	●
Needle collision alarm	●	●	●	●	●	●	●
Yarn breakage alarm	●	●	●	●	●	●	●
Needle detection (infrared)	●	●	●	●	●	●	●
Power-failure memory	●	●	●	●	●	●	●
Overload alarm	●	●	●	●	●	●	●
Automatic lubrication	●	●	●	●	●	●	●
220 V single phase	●	●	●	●	●	●	●
380 V three phase	○	○	○	○	○	○	○
Recommended power (kW)	1.5	1.5	1.5	1.5	1.5	1.5	1.5
Needles (Jinpeng)	●	●	●	●	●	○	○
Needles (Guangyang)	○	○	○	○	○	−	−
Needles (Aka)	−	−	−	○	○	−	−
Needles (Tiancheng)	−	−	−	−	−	●	●
Needles (Groz-Beckert)	○	○	○	○	○	○	○

Installation Planning

Request the configuration-specific dimension drawing and installation requirements before finalizing your layout. The supplied configuration sheet lists an approximate machine weight of 1 tonne.

Application Examples